Product Code:SAE J1942/1
Title:Qualified Hoses for Marine Applications
Issuing Committee:Hydraulic Hose And Hose Fittings Committee
Scope:Effective August 28, 1991, the SAE replaced the USCG as the listing agency for Marine Hose Assemblies. The previous USCG list was discontinued as of December 31, 1992, and is being replaced by this SAE listing, J1942-1.All products appearing on the USCG list as of December 31, 1992, may be carried over to the SAE J1942-1 provided they meet the new test requirements listed in SAE J1942.If your products comply, you may retain your listings with no additional testing. (Please note that the USCG has the authority to request and inspect your test results at their discretion.)The following list consists of hose data provided as of April 30, 2001, and is for convenience in determining acceptability of nonmetallic flexible hose assemblies intended for usage under 46 CFR 56.60-25(c). Where the maximum allowable working pressure (MAWP) or type of fitting is not specified, use the manufacturer's recommended MAWP or type of fitting. This list has been compiled by SAE Staff from information provided by the manufacturers whose product listings appear in this document.Manufacturers wishing to list their products in this document shall:Successfully test their hose to the requirements of SAE J1942, Table 1.Submit a letter of certification to the SAE J1942 test requirements for each specific type of hose tested. All sizes should be included in the same letter which must also include all of the information necessary to make a SAE J1942-1 listing.The SAE will review the letter and may, at their discretion, request to see some, or all, of the test results. A copy of the submittal letter marked 驴Accepted For Listing驴 will be returned to the applicant and a duplicate copy sent to the USCG.The cutoff date for inclusion of a hose listing in the annual SAE Handbook is April 30, of the preceding year. However, listed hoses may be used on vessels as soon as the 驴Accepted For Listing驴 letter is issued by the SAE.Next publication of this listing is scheduled to take place on December 2001. If you wish to include additional hoses in the 2000 publication of this list, please submit your Certified List to SAE Headquarters by October 2001.

标准名称：	热喷涂工程零件热喷涂涂层的应用步骤
英文名称：	Thermal spraying procedures for the application of thermally sprayed coating for engineering components
中标分类：	综合 >> 基础标准 >> 材料防护
ICS分类：	机械制造 >> 表面处理和涂覆 >> 表面处理
发布部门：	中华人民共和国国家质量监督检验检验总局 中国国家标准化管理委员会
发布日期：	2005-06-23
实施日期：	2005-12-01
首发日期：	2005-06-23
作废日期：	1900-01-01
主管部门：	中国机械工业联合会
归口单位：	全国金属与非金属覆盖层标准化技术委员会
起草单位：	全国金属与非金属覆盖层标准化技术委员会
出版社：	中国标准出版社
出版日期：	2005-12-01
页数：	16开， 页数：10， 字数：14千字
计划单号：	20020950-T-604
书号：	155066.1-26717

本标准与GB/T 18718中定义热喷涂涂层应用的通用方法有关。这些涂层用于尺寸超差和磨损零件的再生，或者用于增强特殊用途零件的表面性能。例如：提供耐磨、低摩擦系数、导电导热、绝缘和热障以及腐蚀等性能。本标准不准备为具体工作规定明确的方法，但应注意正确选择工艺、材料和GB/T 19824中所规定的热喷涂工作人员的技术能。此外，本标准既不包括GB/T 9793中钢结构保护的要求，也不包括GB/T 16744喷涂重熔自熔性合金涂层的应用。

没有内容

没有内容

没有内容